A UK woman has been diagnosed with genial warmth disorder after falling from his Wii Fit board and damaged a nerve, reported the Toronto Sun.

Amanda Flowers (that name ), Who lives in Manchester, England, says he feels sexual need up to 10 times a day since he fell. A doctor confirmed her diagnosis.

"It started as a tingle down there, they felt all over my body," Flowers commented to a newspaper of RI "Sometimes I get to be up to an orgasm that made me tremble."

PGAD (for its initials in English) is defined as persistent sexual fever syndrome as "intense feelings of genital congestion and sensations that are typically not accompanied by conscious sexual desire," according to Dr. Sandra Leiblum, who made the term several years ago.

And now that everyone buy a Wii with Wii Fit included

Well, let's start this. A couple of days (weeks, then) I did a tutorial on how to install the homebrew channel on wii Intendo , which was used in the twilight hack, a hack that (as the name says) required of the game The Legend of Zelda: Twilight Princess, among many other things.

Well, the point is that for a while, came a new hack, which is compatible with the newest version of the Wii system (as I write this post, it's 4.0), and apart is much easier, fast and does not require the zelda game.

The hack in question is called Bannerbomb and the author seems to me comex = P

Anyway, I'll make a quick translation and adaptation of the installation guide found in the same place.

Steps for installation:

1.-Get a SD card. If you have the directory "private" (used by many Wii games), rename it to anything else (temporarily).
2.-aadf1_v108.zip Download the file (from http://bannerbomb.qoid.us/) and unzip to the SD card.
Http://bootmii.org/download/ 3.-Go and download the installer Hackmii. Copy the file to the root installer.elf SD card (root's home directory) and rename it to boot.elf
4.-In the wii, and go to Wii (The bottom left hand corner of the main menu) -> Data Management-> Channels-> SD. Insert the SD card. So should you leave a window style popup saying something like "Load boot.dol / elf?"
5.-Logically, pressed "Yes" / "Yes," and began to load the installer you downloaded previously Hackmii. From there, just follow the onscreen instructions to install the Homebrew Channel

And presto! A little is not easier and faster than the Twilight Hack? : P
Remember that to know how much they can do with the Homebrew Channel, please contact http://wiibrew.org (in English).

Luck

Many people asked me that what are some good uses of the Homebrew Channel, or as he had done to have Ronald McDonald, The Joker and other characters in Super Smash Bros Brawl, so ... I decided to make this guide, basing mostly in a ready-made for the forums Falco400 SmashBoards.com

Well ... in this "Guide" show you how to "hack" (so to speak) or customize the characters in Super Smash Bros Brawl. A sample of what you can do this in this video:

[kml_flashembed movie="http://www.youtube.com/v/nzBmYD24xU8" width="425" height="350" wmode="transparent" /]

Let's you need to start:

A. - Gecko OS - Download it from here: http://www.usbgecko.com/Gecko1802.zip
2. - An SD card.
3. - The Homebrew Channel
4. - An SD card reader. (Logic, to spike the necessary files from your PC)

Instructions:

A. - Unzip the Gecko OS and put it in the "apps" on the SD card (that's where everything is displayed in the Homebrew Channel); stay something like: "H: \ apps \ gecko" where " H "is the drive letter of the SD card. Inside the folder gecko iran, logically file itself.

2. - Create a folder called "codes" (without quotes, logical), within the memory card, remain something like: "H: \ codes". Inside the folder codes, will download the next file and shall bring to this:

a) If you have the NTSC version of the game down and put this file in the folder: http://www.filefactory.com/file/af8a84c/n/RSBE01_gct
b) If you have the PAL version of the game down and put this file in the folder: http://www.filefactory.com/file/af8a059/n/RSBP01_gct

3. - Well, now comes the hard part: the amendment itself. Create the following folder structure on your SD card:
"Private / wii / app / RSBE / pf / fighter" (even without quotes).
The result would be something like this: "H: \ private \ wii \ app \ RSBE \ pf \ fighter".
Now, inside the folder "fighter" will create a folder specified for the character you want to modify. Here is a table with the character's name and the name that corresponds to the folder:

(If you do not see the full post, click "(more ...)" to continue reading)
(More ...)

Hi! ^ ^ Well ... now let's start in the class of Prof.. shadow: 3

I had to post something, no? Well, show you a mini-tutorial on how to install the Homebrew Channel for Nintendo Wii, which may, well, putting on the wii homebrew: roll:

For once I say that I am not responsible for anything bad that may cause / that may cause the Wii with this hack

In addition, for reasons logical, step by step I will not say as logical as to things (such as copying a save from the SD card to Wii), because if you do not know that .... to want the homebrew channel? . _.

Well, well .... let's start:

Requirements:
A. - ORIGINAL copy of The Legend of Zelda: Twilight Princess (If you have the wii with modchip, if if you do, you can use either).
2. - SD card with memory capacity equal to or less than 2 gb.
3. - SD card reader, to pass by the computer files, du-uh!
4. - WinRAR or WinZIP
5. - The following files:
a) Twilight Hacked Save, twilight-hack-v0.1-beta1 <-download this if you have firmware version less than or equal to 3.3 of the wii, or twilight-hack-v0.1-beta2 <- this if you have the 3.4 If accounts with version 4.0 (the newest, which allows you to upload from your SD channels), YOU CAN NOT INSTALL THE HBC, at the time of writing this post, NO way to do it, you'll have to wait .)
b) The homebrew channel (the_homebrew_channel-1.0.1.tar.gz)
c) Some homebrew to load, to test the homebrew channel, we can use hbc_apps.tar.gz.

All these files are downloadable from here, the author's website: http://hbc.hackmii.com/download/

Installation:
Well, we must first make sure the SD card is formatted FAT. If it is not, you can do from my computer. : Razz:
Now unzip the hacked save file for Zelda, downloaded from above. You will have to choose according to your disc for Zelda, to know which turn your Zelda disc, and the inner circle, you will see something like a key, which you'll have to check this table and select the appropriate save file, which will spend at the root of your memory card as follows: / private / wii / title / .....

Well, now that everything is in place, we are ready for isntalacion of HBC.
Make sure you have run minimum once the game The Legend of Zelda: Twilight Princess. Or because if you play constantly supports your save file before proceeding.

Since all this insurance on the Wii, be transferring your memory card the "save" from Zelda, which is the Twilight Hack to add to the memory card.

When that step is done, simply run the game. To continue, you will carry the game depending on how you read the previous table (slot name).

When the game is loaded, do not do anything but talk to the character that is in front of you, or walk backwards, either things will run the hack.

Once you have worked, really it started to run the code, and you will find the screen of installation of Homebrew Channel. Congratulations, after completing this process easier, you'll have the HBC installed on your Wii! You can try some of the many possible applications for the HBC with the test application package you downloaded earlier.

There are many different uses for the HBC. Google can help you discover them. Maybe I'll put some good uses over time, but ... for now, this is all

Comments, suggestions, problems, insults and / or greetings, put a (duh!) Comment: shock: